Question How to de-activate manager access codes in E-Plex 2000 and PowerPlex 2000 Series? |
Answer A Manager Access Code should be de-activated for a certain time period - during a Manager’s vacation, for example, or if you created an Access Code but never assigned it to a Manager. Manager Codes that might be needed some time in the future should be de-activated rather than deleted. Required User Level: Master T-1 Put the lock into Pushbutton Programming Mode. T-2 Enter Command 401# to de-activate a Manager Access Code. T-3 Enter the code 401#NNN#, where NNN is the specific Manager ID location, 024 for example. T-4 Example of complete entry: 401#024#. T-5 Enter another # to indicate the end of programming. T-6 You have now de-activated a Manager Access Code. |