Description

Temporarily deactivate a Manager Access Code, for example during a Manager’s vacation, or if you created an Access Code but have not yet assigned it to a Manager. Manager Codes that may be needed in the future should be deactivated rather than deleted.

Resolution

Required User Level: Master

1. Put the lock into Pushbutton Programming Mode.
2. Enter the command to deactivate a Manager Access Code: 
   401#
3. Specify the Manager ID location: 
   401#NNN#, where NNN is the specific Manager ID location (e.g., 024).
4. Example of a complete entry: 
   401#024#
5. Press # to indicate the end of programming.
6. The Manager Access Code is now deactivated.

Applies To

E-Plex 2000 Series Locks
PowerPlex 2000 Series Locks