Description

This procedure temporarily deactivates all regular User Access Codes, excluding Master and Manager codes. Use this function during events such as plant shutdowns or facility lockdowns to prevent access by regular users while maintaining administrative control.

Resolution

Required User Level: Master, Manager

1. Put the lock into Pushbutton Programming Mode.
2. Enter the command to deactivate all Access and Service Codes: 
   498#
3. Example of a complete entry: 
   498#
4. Press # to indicate the end of programming.
5. All regular User Access Codes are now deactivated.

Applies To

E-Plex 2000 Series Locks
PowerPlex 2000 Series Locks