Question How to activate all user access codes in E-Plex 2000 and PowerPlex 2000 Series? |
Answer You may need to activate all users if you have de-activated the whole group - after a lockout, for example. This procedure will re-activate all regular and Service User Access Codes that are not active. Required User Level: Master, Manager Q-1 Put the lock into Pushbutton Programming Mode. Q-2 Enter Command 398#. Q-3 Example of Complete Entry: 398#. Q-4 Enter another # to indicate the end of programming. Q-5 You have now activated all regular User and Service User Access Codes. |