Description

This procedure explains how to program the keypad buzzer volume.

Warning: You might want to adjust the volume depending on where the lock is located—noisy or quiet areas.

Resolution

Required User Level: Master, Manager

1. Enter programming mode: Put the lock into Pushbutton Programming Mode.
2. Set volume code: Enter 008#VV#, where VV is the volume level:
   • 00 = Off
   • 01 = Low
   • 02 = Normal
   • 03 = High
3. Example entry: 008#02# (Normal volume).
4. End programming: Enter another # to indicate the end of programming.
5. Result: The lock will now sound the buzzer at the selected volume until changed again.

Applies To

E-Plex 2000 Series Locks