Question How to de-activate user access codes in E-Plex 2000 and PowerPlex 2000 Series? |
Answer A User Code should be de-activated during a User’s vacation, for example, or if you created an Access Code but never assigned it to a User. User codes that are inactive, but might be needed some time in the future, should be de-activated rather than deleted. Required User Level: Master, Manager S-1 Put the lock into Pushbutton Programming Mode. S-2 Enter Command 400# to de-activate User Access Codes. S-3 Enter the code 400 #NNN #, where NNN is the specific User ID location, 023 for example. S-4 Example of complete entry: 400 #023#. S-5 Enter another # to indicate the end of programming. S-6 You have now de-activated the User Access Code. |