Description

A Manager Access Code should be deleted if it is no longer needed, to free up the code number for another Manager. Codes that may be needed in the future should be deactivated instead of deleted.

Resolution

Required User Level: Master

1. Put the lock into Pushbutton Programming Mode.
2. Enter the command to delete a Manager Access Code: 201#
3. Enter the ID location: NNN#, where NNN is the specific Manager ID (e.g., 024#).
4. Example of complete entry: 201#024#
5. Press # to indicate the end of programming.
6. The Manager Access Code is now deleted, and the ID number can be reassigned to another Manager if needed.

Applies To

E-Plex 2000 Series Locks
PowerPlex 2000 Series Locks