Question How to delete manager access codes in E-Plex 2000 and PowerPlex 2000 Series? |
Answer A Manager Code should be deleted if no longer needed, in order to free the code number to be assigned to another Manager User. Manager Codes that might be needed some time in the future should be deactivated rather than deleted. Required User Level: Master K-1 Put the lock into Pushbutton Programming Mode. K-2 Enter Command 201# to delete a Manager Code. K-3 Enter the ID location NNN#, where NNN is the specific Manager ID location, 024 for example. K-4 Example of complete entry: 201#024#. K-5 Enter another # to indicate the end of programming. By deleting a User ID location, you have now also deleted a User Access Code, allowing you to assign that number to another user if you wish. |