Description

A Manager user’s credential can be temporarily deactivated instead of being permanently deleted. This is useful during situations such as a vacation, leave of absence, or temporary role change.

Once deactivated, the credential can be easily reactivated later by following the appropriate reactivation procedure (referenced as Procedure 9B).

Resolution

Required User Level: Master

1. Put the lock into LearnLok™ Pushbutton Programming Mode: 
   # Master PIN #
2. Enter command 401# to deactivate a Manager user’s credential. 
   The Manager’s PIN or card is not required for this step.
3. Enter the Manager user’s ID location using a three-digit number between 001 and 300. 
   Example ID location: 015
4. Enter a final # to exit programming mode.
5. Example of complete entry (Manager ID 015): 
   401#015# #
6. The Manager user’s credential is now temporarily deactivated.

Applies To

E-Plex 36xx, 37xx, 56xx, and 57xx Series Locks