Activating Access User Credentials: E-Plex 36xx/37xx/56xx/57xx Series Locks

This guide explains how to re-activate access user credentials on E-Plex locks, for cases such as suspected credential theft or temporary deactivation.

All credentials can be deleted together if necessary.
Warning: manually re-enrolling hundreds of users can be time-consuming.

Resolution

Required User Level: Master, Manager

Put the lock into LearnLok™ Pushbutton Programming Mode by entering # Master PIN #.
Enter 300# to re-activate an access user’s credential; you do not need this user’s PIN or card.
Enter the user ID location (001–300).
Example for ID 023: 300#023# #. This activates the credential that was temporarily deactivated.

Applies To

E-Plex 36xx, 37xx, 56xx, 57xx Series Locks

Related to