Activating User Access Codes: E-Plex 30xx/50xx Series Locks

This guide explains how to re-activate user access code on E-Plex locks, for cases such as suspected credential theft or temporary deactivation.

Description

A User Code should be activated if it has been de-activated for a certain time period - during a user’s vacation, for example. User Codes that are inactive, but might be needed some time in the future, should be de-activated rather than deleted.

Resolution

Required User Level: Master, Manager

Put the lock into Pushbutton Programming Mode.
Enter Command 300# to activate a User Code.
Enter the ID location NNN #, where NNN is the specific User ID location, 023 for example.
Example of complete entry: 300 #023#.
Enter another # to indicate the end of programming.
You have now activated the User Access Code assigned to 023.

Applies To

E-Plex 30xx/50xx Series Locks

Related to