Description

A Service User Access Code should be activated if it has been deactivated for a certain time period - during a Service User’s vacation, for example.

Resolution

Required User Level: Master, Manager

1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 302# for Service User Functional Code.
3. Enter the ID location NNN#, where NNN is the specific User ID location, 025 for example.
4. Example of complete entry: 302#025#.
5. Enter another # to indicate the end of programming.
6. You have now reactivated a Service User Access Code.

Applies To

E-Plex 30xx/50xx Series Locks