How to activate all user credential in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Question

How to activate all user credential in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Answer

You will need to re-activate all regular Access and Service users if you had de-activated them earlier as described in Procedure 16B temporarily - after a lockout or a strike, for example. After this procedure is executed, all these users will have access to the lock again.

Required User Level: Master

1. Put the lock into “LearnLokTM” Pushbutton Programming Mode - # Master PIN (or Manager credential) #
2. Enter Command 398# to re-activate all Access and Service users
   Enter a last # to indicate the end of programming. 
   Example of Complete Entry:
   398# #.