How to program the Lock for keypad buzzer volume in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Question

How to program the Lock for keypad buzzer volume in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Answer

You may want to adjust the volume of the Keypad Buzzer depending on where the lock is located - a noisy or quiet area.

Required User Level: Master, Manager

1. Put the lock into Pushbutton Programming Mode.
2. Enter the command sequence 008#VV# (where VV is a scale of volume from 00 to 03; 00 = off; 01 = Low; 02 = Normal; 03 = High).
3. Example of Complete Entry: 008#02#.
4. Enter another # to indicate the end of programming.
5. The lock will now sound the buzzer at the desired volume Normal/Medium, until you change it.