How to modify the master user access pin in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Question

How to modify the master user access pin in E-Plex 36xx/37xx/56xx/57xx Series Locks?

Answer

Required User Level: Master

1. To change the factory default Master PIN, follow the next three steps:
2. Put lock into Pushbutton Programming Mode
3. Use the command, 000, to change the Master PIN, followed by the new Master PIN itself.
4. You must use 8 digits between 00000000 and 99999999 as follows: 000#MMMMMMMM#, we’ll use 000#87654321# as an example.
5. Enter the Master PIN again 87654321# for confirmation.
6. Example of Complete Entry: 000#87654321#87654321#.
7. Key in another # to indicate the end of programming.
8. After that, you will always use your own Master PIN. Please write this PIN down and keep in a safe place. From now on the factory default Master PIN is no longer valid.

Note: In the E-Plex LearnLokTM keypad programming and usage mode, the master’s credential is PIN only and no card can be assigned to the Master.