Description

A Manager Code should be deleted from the lock if no longer needed, in order to free the code ID location to be assigned to another Manager User. Manager Codes that might be needed some time in the future should be de-activated rather than deleted.

Resolution

Required User Level: Master

1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 201# to delete a Manager Code.
3. Enter the ID location NNN#, where NNN is the specific Manager ID location, 024 for example.
4. Example of complete entry: 201#024#.
5. Enter another # to indicate the end of programming.

You have now deleted a Manager ID location, and (indirectly) his Access Code, allowing you to assign that ID location to another Manager or Access User if you wish.

Applies To

E-Plex 30xx/50xx Series Locks