How to program the lock for Keypad Buzzer Volume in E-Plex 30xx/50xx?
The volume of the Keypad Buzzer may need adjusted depending on where the lock is located - a noisy or quiet area.
ResolutionRequired User Level: Master, Manager - Put the lock into Pushbutton Programming Mode.
Enter the code 008#VV# (where VV is a scale of volume from 00 to 03; 00 = off; 01 = Low; 02 = Normal; 03 = High). Example of Complete Entry: 008#02#. - Enter another # to indicate the end of programming.
- The lock will now sound the buzzer at the desired volume Normal, until you change it.
|
Applies ToE-Plex 30xx/50xx Series Locks |