Resolution

Required User Level: Master

1.  To change the factory code or current Master Code, follow the next three steps: 
2. Put lock into Pushbutton Programming Mode. 
3. Use the command, 000, for Master, then the new Master Code number. 
4. You must use 8 digits between 00000000 and 99999999 as follows: 000#MMMMMMMM#, we’ll use
     000#87654321# as an example. 
5. Enter the Master Code again 87654321# for confirmation. 
6. Example of Complete Entry: 000#87654321#87654321#. 
7. Key in another # to indicate the end of programming. 
8. After that, you will always use your own Master Code. Please write the code down and keep in a
    safe place. The factory code is no longer valid.

Applies To

E-Plex 30xx/50xx Series Locks