Resolution

If the E-Plex is in factory mode.

• Program the Access Code Length (default length is four digits).
  The access code field length can only be changed when the lock is not activated (when still in the factory mode).
• Change factory Master to your own Master Code (always eight digits) to place lock in access mode.

Steps to put lock in Pushbutton Programming Mode

1. Set the Date / Time
2. Program the Lock ID and Unlock time
3. Program the Lock for the Duration of Passage Mode (if desired).
4. Program the Lock for Tamper Time Settings.
5. Program the Lock for Buzzer Volume.
6. Add Access Codes as desired.

Default values of the E-Plex® Lock programmable parameters

Applies To

E-Plex 30xx/50xx Series Locks