Resolution

If the E-Plex 2000/PowerPlex 2000 is in factory mode.

• Program the Access Code Length (default length is four digits).
  The access code field length can only be changed when the lock is not activated (when still in the factory mode).
• Change factory Master to your own Master Code (always eight digits) to place lock in access mode.

Steps to put lock in Pushbutton Programming Mode

1. Program the Unlock time.
2. Program the Lock for the Duration of Passage Mode (if desired).
3. Program the Lock for Tamper Time Settings.
4. Program the Lock for Buzzer Volume.
5. Add Access Codes as desired.

Applies To

E-Plex 2000/PowerPlex 2000 Series Locks