Manager User Operations in Auditcon Models 52 & T52

Question

What are the Manager User Operations in Auditcon Models 52 & T52?

Answer

These operations are only available in Single Mode and can only be performed by the Manager User (User 1). All Manager User Operations involve management of User 2. 

User 2 can have a lock access status of “Enabled” or “Disabled”. If “Enabled”, User 2 can open the lock. When User 2 is added to the lock, the default lock access status is “Enabled”. The Manager User (User 1) has the authority to change the lock access status for User 2 and can temporarily “Disable” lock access for the user.

Add User2

1. Press # and then 3.
2. Enter Manager User (User 1) combination.

Note: User 2 is added to the lock as “Enabled” with a factory combination of “502550”. User 2 can change the User 2 combination while Enabled, but only the Manager User (User 1) can change the lock access status.

Delete User2

1. Press # and then 4.
2. Enter Manager User (User 1) combination.

Disable User2

1. Press # and then 7.
2. Enter Manager User (User 1) combination.

Note: If you try to disable User 2 when already disabled, you will get an error indication

Enable User2

1. Press # and then 6.
2. Enter Manager User (User 1) combination.

Note: If you try to enable User 2 when already enabled, you will get an error indication.