To unlock with Time Delay Set in Auditcon Models 52 & T52

Question

How to unlock with Time Delay Set in Auditcon Models 52 & T52?

Answer

If operating a Model T52 Lock with Time Delay set to something other than 0, red flashes will display after a combination has been entered and will continue during the delay while the lock is powered.

Note: If you have a Time Delay Display unit installed, the display unit will count down to the end of the time delay period and will count up to the end of the window period.

    When the delay time expires, you must power the lock.

    Green flashes display with beeps to indicate the opening window is active and will
    continue during the window while the lock is powered.

    For a Dead Bolt, place the dial in the Home position.

    Enter the combination(s) to open the lock.