How to Unlock with Time Delay Set in Auditcon Models 52 & T52? – dormakaba Americas Knowledge Base

Description

When a T52 lock has a Time Delay configured (other than 0), red flashes indicate the delay period is active. The red flashes continue while the lock remains powered and the time delay counts down.

If a Time Delay Display Unit is installed, it will show a countdown to the end of the delay period and count up during the lock's opening window.

Resolution

To unlock a lock with Time Delay, follow these steps:

Step	Action	Lock Response
1	Wait until the Time Delay expires, then power the lock using the battery or power source.
2	For a Dead Bolt, place the dial in the home position and enter the combination(s) to unlock.	Lock shows green flashes and beeps during the opening window.
2	For a Slide Bolt, rotate the container handle to unlock after entering the combination(s).	Lock opens, green flashes continue until bolt fully retracts.
3	If the lock is not powered during the opening window, power it to resume unlocking sequence.	Lock resumes green flashing and beeping until combination is entered.

Applies To

Auditcon Models 52 & T52 with Time Delay enabled

Related to