Set time Delay and Delayed opening Window in Auditcon Models 52 & T52

Question

How to set time Delay and Delayed opening Window in Auditcon Models 52 & T52?

Answer

Note: Changing the lock mode will reset the combination(s) to “502550”.

1. Press # and then 5. .

2. • For Single Mode (Factory combination is “502550”.)
   Enter Manager User (User 1) combination.

   • For Dual Custody Mode
   Enter User 1 or User 2 combination.
   Enter the second combination.

3. Enter number of minutes (01-99) you want to delay lock opening or “00” to disable time delay.
4. Enter the desired time delay again for verification.
   If not “00”, proceed to step 6.
5. Enter number of minutes (01-20) for the delayed opening window.
6. Enter number of minutes for the delayed opening window again for verification.

Note: A change in delayed opening will not take effect until after the next opening of the lock.