What are the Lock Responses in Auditcon Models 52 & T52?
Answer
The lock is “powered” when simultaneous green and red flashes display with a beep .
Each keystroke generates a green flash with a beep .
The completion of a step within an operation is indicated by a green flash with a beep .
The successful completion of an operation is indicated by simultaneous green and red flashes.
If a valid combination or combinations are entered to open the lock, the lock will respond as follows to indicate that the lock is ready to open: Dead Bolt - 1 slow green flash Slide Bolt - Continuous green flashes ... for approx. 5 seconds
An error is indicated by three red flashes with beeps.
If the Battery Assist option is included on your lock and a 9 Volt Alkaline has been installed for Battery Assist, the LEDs will continually flash throughout the duration of a Time Delay or Open Window period. There is not a battery low indicator for Battery Assist. If the feature is not functioning properly, check the battery.