Description

These instructions apply to Super Master operations on Auditcon Models 52 and T52. The Super Master Combination is a six-digit code used to reset the lock to the factory default combination (50-25-50) if all user combinations are lost.

Resolution

WARNING: If you do not change the default Super Master Combination before changing any User combinations, you will permanently lose Super Master control.

CAUTION: Once set, the Super Master Combination cannot be changed. Record the combination and store it in a secure location.

1. If the lock is self-powered, activate it by turning the dial back and forth in both directions until simultaneous green and red flashes appear with a beep .
    
2. Press Enter , then press 0 . One green flash displays with a beep .
    
3. Enter the factory default Super Master Combination: "1-2-0-9-4-3" .  One green flash displays with a beep .
    
4. Enter a new six-digit Super Master Combination. One green flash displays with a beep .
    
5. Re-enter the new Super Master Combination to confirm. Simultaneous green and red flashes indicate the operation completed successfully.

Applies To

Auditcon Models 52 and T52