Description

Use this procedure to program the current date on an Auditcon Model 552 lock. The lock requires the date to be set correctly before you perform any other time-based or audit-related functions.

Resolution

Before You Begin

• Ensure you have the Master User combination

• Perform this procedure before setting the lock time or using any deluxe time functions

Step-by-Step Instructions: Set Lock Date

1. Enter Date Programming Mode

   1. Press #, then 6.

2. Authenticate as Master User

   1. Enter the Master User combination.

3. Set the Year

   1. Enter the two-digit year (for example, 05 for 2005).

   2. Re-enter the same two-digit year to confirm.

4. Set the Month

   1. Enter the two-digit month (for example, 01 for January).

   2. Re-enter the same two-digit month to confirm.

5. Set the Day

   1. Enter the two-digit day of the month (for example, 31 for the 31st).

   2. Re-enter the same two-digit day to confirm.

6. Once the final confirmation is accepted, the lock stores the programmed date.

Important Notes

• You must complete Set Lock Date and Set Lock Time before initiating any other deluxe time-related operations.

• Enter all values using two digits, including leading zeros where applicable.

Applies To

Auditcon model 552