Set Operating Mode and Assign Lock ID in Auditcon Models 252 & 552

Question

How to Set Operating Mode and Assign Lock ID in Auditcon Models 252 & 552?

Answer

When you change the operating mode, the lock will also prompt you to enter a two-digit number (01-99) that will identify the lock in the audit report. This lock ID assignment is optional. If you do not want to assign an ID to the lock, you can enter “00” at the prompt for the Lock ID.
 

1. Press # and then 2.
2. Enter the Master User combination.
3. Enter 01 for Single User access or 02 for Dual User access.
4. Enter 01 or 02 again to verify the access type.
5. Enter 01 for Independent mode or 02 for Super/Sub mode.
6. Enter 01 or 02 again to verify the mode.
7. Enter a two-digit number (01-99) for the lock ID. If you do not want to assign a lock ID, enter 00.
8. If you entered a number other than “00” for lock ID, enter the number again for verification.