How to Set Master User Pin in in Auditcon Models 252 & 552

Question

How to Set Master User Pin in in Auditcon Models 252 & 552?

Answer

Note: The default PIN assigned to the Master User is “120943”. The Master User must change this default PIN before any lock operations can be performed.

Once you have successfully opened the lock using the factory PIN, the Master User must change the default Master User PIN by completing the following steps:

1. Press # and then 1.
2. Enter the two-digit Super Master ID 00 followed by the default factory Super Master User PIN “120943.”
3. Enter the two-digit Super Master ID 00 followed by the new Master User PIN.
4. Enter the two-digit Master ID 00 followed by the new Master User PIN again for verification.
5. Record the new PIN and store it in a secure place.

Note: Once the Master User PIN has been set, the factory combinations (User ID + PIN of “502550”) will no longer open the lock. In addition, the Master User PIN cannot be changed back to the default PIN of “120943”. The lock is now operating in independent mode with Single User access.