How to Shelve Lock Using Super Master Combination?

Description

This operation places the lock in Shelved Mode, which resets most lock settings to factory defaults. Audit information and the Super Master Combination are retained.

Resolution

Important Notes:

• A green flash followed by three red flashes indicates insufficient power to perform the shelving operation.

Step	Action	Lock Response
1	For a Dead Bolt, place the dial in the HOME position.
2	Press # and then 0.	Green and Red Flashes
3	Enter the Super Master User combination (ID “00” + six-digit PIN). The lock will indicate readiness.	Dead Bolt: 1 slow green flash Slide or Swing Bolt: Continuous green flashes for ~5 seconds
4	For a Dead Bolt, dial clockwise until the bolt retracts. For a Slide/Swing Bolt, rotate the container handle to unlock.
5	The lock is now shelved and can be opened with any valid User ID (except “00”) + 502550.

Applies To

Auditcon