Set Super Master User Pin in Auditcon

Question

How to Set Super Master User Pin?

Answer

The lock must be in factory mode.

Note: The default factory PIN assigned to the Super Master User is “120943”. This default PIN must be changed before the Super Master User combination can be used to shelve the lock.

1. Press # and then 0.
2. Enter the two-digit Super Master ID 00 followed by the default factory Super Master User PIN “120943.”
3. Enter the two-digit Super Master ID 00 followed by any six-digit PIN other than “120943”.
4. Enter the two-digit Super Master ID 00 followed by the new six-digit PIN entered in Step 5 again for verification. The new Super Master User combination is now set.

5. Record the combination and store it in a secure place.

   WARNING: The setting of the Super Master User PIN is optional, however, if you do not set the Super Master User PIN before setting the Master User PIN, the Super Master shelving capability will be permanently lost.
   Important Note: The lock must be manually powered before each operation by briskly turning the dial back and forth .