How to Set the Super Master User PIN on Auditcon Models 52 & T52?

Description

These instructions apply to Super Master operations on Auditcon Models 52 and T52. The Super Master User PIN is a six-digit code assigned to Super Master ID 00. This PIN enables shelving and Super Master–level control when the lock is in factory mode.

Resolution

Note: 

• The default factory Super Master User PIN is 120943. You must change this default PIN before using the Super Master User combination to shelve the lock.
• Important: Before each operation, manually power the lock by briskly turning the dial back and forth.

WARNING: Setting the Super Master User PIN is optional. However, if you do not set it before setting the Master User PIN, Super Master shelving capability will be permanently lost.

Prerequisite: The lock must be in factory mode.

1. Press #, then press 0. 
2. Enter Super Master ID 00, followed by the default factory Super Master User PIN 120943. 
3. Enter Super Master ID 00, followed by a new six-digit PIN. Do not reuse 120943. 
4. Enter Super Master ID 00, followed by the same new six-digit PIN again to confirm. The Super Master User PIN is now set.
5. Record the Super Master User PIN and store it in a secure location.

Applies To

Auditcon Models 52 and T52