Serviceable Swing Bolt
Tamper-Evident Swing Bolt
Tamper-Evident Dead Bolt
Installation Best Practice
A & B: Physically mount the keypad. (Steps 1-4)
Note: Do not install batteries or connect to power.
C: Physically mount the lock body. (Step 5)
Connect the keypad cable to the lock. (Step 6)
Note: Do not pull or overstretch the keypad cable as it may be pulled out of the internal connection port.
Install batteries or connect power. (Step 7)
Please Note: If programming lock and then shipping to site, disconnect power and do not reapply/insert battery power until all systems are mounted and properly plugged in. If keypad does not immediately respond, please allow 30 to 45 seconds for entry to properly pair with lock body.
Set Up: Open the container and follow the instructions on pages 16-18 to commission and set up your lock system.
Note: The CenconX lock system is a combined hardware, software, and mobile solution. The complete installation and commissioning of your lock system will require coordination with the software administrator. See page 3 for details.
Serviceable Dead Bolt
Installation Best Practice
A & B: Physically mount the keypad. (Steps 1-3)
Note: Do not install batteries or connect to power.
C: Physically mount the lock body. (Step 4)
Note: Do not pull or overstretch the keypad cable as it may be pulled out of the internal connection port.
Connect the keypad cable to the lock. (Step 5)
Install batteries or connect power. (Step 6)
Please Note: If programming lock and then shipping to site, disconnect power and do not reapply/insert battery power until all systems are mounted and properly plugged in. If keypad does not immediately respond, please allow 30 to 45 seconds for entry to properly pair with lock body.
Set Up: Open the container and follow the instructions on page 19 to commission and set up your lock system.
Note: The CenconX lock system is a combined hardware, software, and mobile solution. The complete installation and commissioning of your lock system will require coordination with the software administrator. See page 3 for details.