Codes - Activating and deactivating codes via Combi B 90 PC Software

2 audit entries are generated when a new code is assigned to an already added ('active') user. One entry for the old user code 'unused' and a second entry for the new user code "active".

There are 90 codes. 1 Master Code with the ID 00, 1 Manager Code with the ID 01 when the Manager is activated, 88 User Codes and 1 Courier Code with the ID 95. 

If the Manager Code is not activated, there are 89 User Codes.

On the Codes tab it is possible to add, enable, disable and delete users.

• The first column shows the user ID.
• The second column shows the current status of the users. 
  – The status 'active' means that a code was assigned to a user.
  – The status 'unused' means that the respective user was either deleted or is unused.
• To disable or delete users, the function 'disable' or 'delete' must be selected in the checkbox.

 Activating codes

It is possible to change or cancel code entries or any selected function before clicking on Apply. Otherwise all selected settings will be transferred to the lock.

1. To add a user, enter a code combination consisting of the 2 digit ID of the respective code and 6 freely selectable digits.

   

2. Repeat the same code for confirmation.
    

   

3. Click on Apply.
   

   The user is now active.