Configure the Input Signal as a Remote Disabled signal using Display Keypads in LA GARD 700 Series Remote Disable

Question

How to configure the Input Signal as a Remote Disabled signal using Display Keypads in LA GARD 700 Series Remote Disable?

Answer

Follow these steps to configure the Input Signal on a Display Keypad:

1. Enter an Authorized User ID and Combination.
2. Navigate through the Main Menu and select “System”
3. Select “Input Signal” from the sub-menu.
4. Scroll through the list of options and select “Disable Open” to set the Input Signal to Remote Disable mode.
5. “Success Mode updated” will appear on screen and the Keypad will beep three times and flash a green LED once complete.