Paxos - Querying Information on the I/O-Box – dormakaba Americas Knowledge Base

1. Wake up display (if necessary) and access the Info menu (see article "Accessing the Info menu").

2. Select and confirm menu option “System”.

The following system settings can now be queried using the arrow keys or by turning the knob.

– Designated code format (“PIN” or “ID+PIN”)

– Status Parallel Mode (“On” or “Off ”)

– Supply of system (“Battery”, “Accumulator” or “Empty”)

– Location of the voltage source (“Input Unit” for battery operation, “I/O-Box” or “IP-Box” with external supply)

– Current Bus voltage

1. Wake up display (if necessary) and access the Info menu (see article "Accessing the Info menu").
2. Select and confirm menu option “System”.	Display Says: Info Menu System

The following system settings can now be queried using the arrow keys or by turning the knob.
– Designated code format (“PIN” or “ID+PIN”)	Display Says: System Code Format: PIN Only

– Status Parallel Mode (“On” or “Off ”)	Display Says: System: Power battery

– Supply of system (“Battery”, “Accumulator” or “Empty”)	Display Says: System Parallel Mode: Off

– Location of the voltage source (“Input Unit” for battery operation, “I/O-Box” or “IP-Box” with external supply)	Display Says: Location: Input Unit

– Current Bus voltage