Authorization Without Code: Accessing I/O-Box System Information
Authorization: No code needed
To query the information of the I/O-Box, proceed as follows:
1. Wake up display (if necessary) and access the Info menu (see article "Accessing the Info menu"). | ||
2. Select and confirm menu option “System”. |
||
| The following system settings can now be queried using the arrow keys or by turning the knob. | ||
Designated code format (“PIN” or “ID+PIN”) |
Code Format: PIN Only |
|
|
|
|
|
Status Parallel Mode (“On” or “Off ”) |
Power battery |
|
|
|
|
|
Supply of system (“Battery”, “Accumulator” or “Empty”) |
Parallel Mode: Off |
|
|
|
|
|
Location of the voltage source (“Input Unit” for battery operation, “I/O-Box” or “IP-Box” with external supply) |
Input Unit |
|
|
|
|
|
Current Bus voltage |
||