The signal volume is available only in the setting menu of the input unit.
Authorization: Master Code “MA1”
Requirement: System status “Unlocked” (door locks and door bolt open)
To set the signal volume, proceed as follows:
1. Wake up display (if necessary) and access menu. | ||
2. Select and confirm the menu option “Settings”. | ||
3. Select and confirm menu option “Settings Input Unit”. | ||
4. Select and confirm menu option “Input Unit Volume”. | ||
5. Enter and confirm Master Code of lock 1. | ||
6. Adjust the desired volume and confirm (setting range: 0 (Off ), 1...5). | ||
The setting is stored. The input unit returns to the menu option “Input Unit Volume”. You can now configure other settings or return to the standard mode display. | ||