The function Dual Mode allows you to determine whether two valid codes are needed to open a lock (function enabled) or only one valid code (function disabled).
– In the factory settings, Dual Mode is disabled.
– The Dual Mode must be set for each lock individually. In order to activate Dual Mode in the menu, two opening codes must have been created already for the appropriate lock.
Authorization: Master Code
Requirement: System status “Unlocked” (door locks and door bolt open)
To enable or disable the Dual Mode function, proceed as follows:
1. Wake up display (if necessary) and access menu. | ||
2. Select and confirm the menu option “Settings”. | ||
3. Select and confirm the menu option settings for the desired lock. | ||
4. Enter and confirm Master Code of the selected lock. | ||
5. If the function Dual Mode is disabled, select and confirm the menu option “Settings L1 Other”. | ||
6. Select and confirm menu option “Other L1 Dual Mode” or “Settings S1 Dual Mode”. | ||
7. Select and confirm desired setting. | ||
The selected setting is stored. The input unit returns to the menu option “Settings S1 Dual Mode”. You can now configure other settings or return to the standard mode display. | ||