Paxos - Enabling/Disabling the Show Time Lock End
The Show Time Lock End function controls what the input unit displays during a locking period. When enabled, the display shows the date and time when the locking period ends. When disabled, the display shows the current date and time.
- The factory default setting for Show Time Lock End is enabled.
- This setting can only be configured in Lock 1 and applies to the entire locking system.
- Press <CLR> to display the current time of day.
Authorization: Master Code “MA1”
Requirement: System status must be Unlocked (door locks and door bolt open).
Steps to Enable or Disable Show Time Lock End
| 1. Wake up the display if necessary and access the menu. | ||
| 2. Select and confirm the menu option Settings. | ||
| 3. Select and confirm Settings Lock 1. | ||
| 4. Enter and confirm the Master Code for Lock 1. | ||
| 5. Select and confirm Settings L1 Show Time Lock End. | ||
6. Select and confirm the desired setting:
| | |
| The system saves the selected setting. The input unit returns to Settings L1 Show Time Lock End. You may configure additional settings or return to standard mode. | ||