The function Locking Mode allows you to define whether the locks close automatically after closing the door bolt or whether the closing process must be confirmed with the key <Enter> or by pressing the dial knob.
– On delivery, the Locking Mode is set to “Automatic”.
– Unless required for technical reasons, the Locking Mode should be left on “automatic”.
– The Locking Mode can only be defined in the settings for lock 1 and is valid for the entire locking system.
Authorization: Master Code “MA1”
Requirement: System status “Unlocked” (door locks and door bolt open)
To set the Locking Mode, proceed as follows:
1. Wake up display (if necessary) and access menu. | ||
2. Select and confirm the menu option “Settings”. | ||
3. Select and confirm menu option “Settings Lock 1”. | ||
4. Enter and confirm Master Code of lock 1. | ||
5. Select and confirm menu option “Settings S1 Locking Mode”. | ||
6. Select and confirm desired setting. | ||
The selected Locking Mode is stored. The input unit returns to the menu option “Settings S1 Fast Locking”. You can now configure other settings or return to the standard mode display. | ||