Change the Time/Date/DST on a 702 non-display Keypad in LA GARD 700 Series

Question

How to change the Time/Date/DST on a 702 non-display Keypad in LA GARD 700 Series?

Answer

Follow these steps to change the Time/Date on a 702 non-display Keypad:

To change the Time/Date:

1. Using the Keypad, input the pound key (#) and the number 65
2. Input the Authorized User ID and Combination
3. Input the 10-digit Time Date (YY-MM-DD-24HR Clock)
4. Press <return key> (←)
5. The Keypad will beep three times and flash a green LED once complete.

To enable/disable Observe DST:

1. Using the Keypad, input the pound key (#) and the number 63
2. Input the Authorized User ID and Combination
3. Press 0 to not observe DST, or Press 1 to observe DST
4. Press <return key> (←)
5. The Keypad will beep three times and flash a green LED once complete.

Changes to DST must be done via the LA GARD software. For more information, refer to the LA GARD help menu and to section 3.17 "Time/Date Rules in LA GARD 700 Series Locks".