Change the Time/Date/DST on a Display Keypad in LA GARD 700 Series

Question

How to change the Time/Date/DST on a Display Keypad in LA GARD 700 Series?

Answer

Follow these steps to change the Time/Date/DST on a Display Keypad:

1. Enter an Authorized User ID and Combination.
2. Navigate through the Main Menu and select “Time/Date”.
3. Select one of the follow sub-menu options:
   • “Time Format” – Choose between 24Hr and 12Hr
   • “Date Format” – Choose between yy_mm_dd, mm_dd_yy, and dd_mm_yy
   • “Set Time Date” – Input the time and date with the number pad
   • “Observe DST” – Select either Enable or Disable
4. “Success updated” appears onscreen. The Keypad will beep three times and flash a green LED once complete.

To effectively use the DST settings, the DST tables must be sent down from the 700 Series Software and the selected Time Zone must observe Daylight Savings Time. For more information, refer to section 3.17 “Time/Date Rules in LA GARD 700 Series Locks". 

Note: If the Time/Date is not set after a prolonged power outage, access time lock schedules cannot be enforced and may result in the inability to open the lock until the Time/Date is set.