Change a User combination on a Display Keypad in LA GARD 700 Series

Question

How to change a User combination on a Display Keypad in LA GARD 700 Series?

Answer

Follow these steps to change a User combination on a Display Keypad: 

For Master/Manager Users changing another User’s combination, do the following:

1. Enter an Authorized User ID and Combination.
2. From the Keypad display Main Menu, select “Users”, then select “Edit”
3. Enter the ID of the User whose combination will be changed.
4. Select “Reset Combo”
5. Enter the New Combination.
6. Confirm the New Combination.

“Success combo reset” will appear on screen. The Keypad will produce 3 high beeps and flash a green LED. The new combination is set and will be in effect the next time the User enters their combination.

For a User changing their own combination, do the following:

1. Enter an Authorized User ID and Combination.
2. From the Keypad display Main Menu, select “Change combo”.
3. “New Combo” appears on screen. Input a new combination with the number pad. 
   Note: The new Combination must be different from the old Combination. The User is advised to use a non-trivial combination.
4. “Confirm” appears on screen. Input the same combination from the previous step to confirm.

“Success” will appear on screen. The Keypad will beep three times with a green LED and return to the Enter ID menu once complete. The new combination is set and will be in effect the next time the User enters their combination.