Open a Lock (Remote disable) in LA GARD 700 Series

Question

How to open a Lock (Remote disable) in LA GARD 700 Series?

Answer

With the application of the Alarm Box, the opening sequence can be disabled by asserting a signal on the Alarm Box. The signal may come from an external alarming system that could be connected to this lock to prevent it from opening. 

Please observe the following while using the Remote Disable:

• The Remote Disable assertion will not block users from accessing the menus on a Display Keypad
• The signal must be asserted prior to the user authentication for it to be recognized by the system
• Duress combinations will still trigger the alarm signal, even if Remote Disable is asserted
• A Keypad with a display will show ‘Lock #x NOT open’ when the Remove Disable is asserted. The ‘x’ would be replaced by a lock that is targeted to be opened
• A non-Display Keypad will indicate that the opening of the lock has failed if an opening is attempted with the Remote Disable asserted. The Keypad will produce 3 low beeps accompanied by 3 red LED flashes