Paxos - Enabling/Disabling the Show Time Lock End

The Show Time Lock End function controls what the input unit status display shows:

• When enabled, the display shows the date and time when the locking period ends.

• When disabled, the display shows the current date and time.

• By default, this function is enabled.

Configuration Rules and Behavior

• You can define Show Time Lock End only in the settings for lock 1.
  The setting applies to the entire locking system.

• At any time, you can press <CLR> to temporarily display the current time of day, regardless of the configured setting.

Authorization: Master Code “MA1”
Requirement: System status Unlocked (door locks and door bolt open)

Steps to enable or disable the function Show time lock end

1. Wake up the display if necessary and access the menu.
2. Select and confirm the menu option Settings.
3. Select and confirm Settings Lock 1.
4. Enter and confirm Master Code of lock 1.
5. Select and confirm menu option “Settings L1 Show time lock end”.
6. Select and confirm desired setting. On: Enable function Show time lock end Off : Disable function Show time lock end
The selected setting is stored.  The input unit returns to the menu option “Settings L1 Show time lock end”. You can now configure other settings or return to the standard mode display.