Edit a User on a Display Keypad in LA GARD 700 Series

Question

How to edit a User on a Display Keypad in LA GARD 700 Series?

Answer

Follow these steps to edit a User on a Display Keypad:

1. Enter an Authorized User ID and Combination
2. Navigate through the Main Menu and select “Users”.
3. From the sub-menu, select “Edit”.
4. Input the User ID to be edited.
5. From the menu, select one of the following settings to change and perform the associated steps:
   • Status of a User:
     1. Select “Status”
     2. Select between Enabled and Disabled
   • Reset the Combination:
     1. Select “Reset Combo”
     2. New Combo appears on screen. Input a new Combination with the number pad
        Note: The new Combination must be different from the old Combination. The User is advised to use a strong combination.
     3. Confirm appears on screen. Input the same Combination from the previous step to confirm. Success combo reset appears on screen. The Keypad will beep three times and flash a green LED once complete
   • Change User Privileges:
     1. Select “Privileges”
     2. Select from Open Priv, Audit Priv, TDO Pin Priv and Timelock Priv. For each, use the Keypad to select which locks the User will have privilege(s) on, if applicable
   • Change the User Type:
     1. Select “User Type”
     2. Select between Standard User and Manager
6. Navigate through the options and select “Update User”. “Success” appears on screen. The Keypad will beep three times and flash a green LED once complete.