Question

How to add a User on a Display Keypad in LA GARD 700 Series

Answer

Steps to add a User on a Display Keypad 

1. Enter an Authorized User ID and Combination.
2. Navigate through the Main Menu and select “Users”.
3. From the sub-menu, select “Add”.
4. Input a new User ID.
5. Select a User Type between Standard User and Manager.
6. Input a Combination with the Keypad. 
   Note: When attempting to open a lock for the first time, the User may be required to change their combination. The new Combination must be different from the old Combination. The User is advised to use a strong combination.
7. “Confirm” appears on screen. Input the same Combination from the previous step.
8. “Enroll FOB?” appears on screen. Select Yes or No. 

9. On the next screen that opens, you are given options for setting User Privileges. Default Privileges are Open/Access and Audit. To keep the Default Privilege, skip to step 10. 
   To edit user privileges, do the following:

            a) Select User Privileges from the sub-menu.
            b) To customize Privileges for this user, select from one of the available options; "Open Priv"
                 (Open Privilege), "Audit Priv" (Audit Privilege), or "TDO Pin Priv" (TDO with Pin Privilege). 
                 If adding a Manager, the “TimeLock” Privilege will also be available.
            c) Use the keypad to enter the number(s) corresponding to the locks for which the user will
                have this privilege, then press the (←). Repeat for each Privilege as needed. Note: When
                granting TimeLock Privileges to a Manager, you will be asked “Has TL Priv?” Simply
                choose between “Yes” and “No”.

10. When you are finished setting User Privileges, navigate through the options and select “Add User”. “Success” appears on screen. The Keypad will beep three times and flash a green LED once complete.