Paxos - Setting a Time Lock Delay

The function Time Lock Delay is used to set the Time Lock Delay, which appears as the default value in the activation dialog Time Lock Delay (see section 4.8 "Enabling a Time Lock Delay"). The default value can be changed by the user in the activation dialog and is then stored as a new default value for the next Time Lock Delay.

• Setting range of Time Lock Delay [mmm]:
  - 000 Time Lock Delay disabled
  - 000 to 240= 1 minute to 240 minutes
• On delivery, the Time Lock Delay is disabled (0 minutes).
• The Time Lock Delay can only be defined in the settings for lock 1 and is valid for the entire locking system.

Authorization: Master Code “MA1”, Time Code “TC1”
Requirement: System status “Unlocked” (door locks and door bolt open)
                       System status “Secured” (door locks and door lock closed)

To set the Time Lock Delay time, proceed as follows:

1. Wake up display (if necessary) and access menu.
2. Select and confirm the menu option “Settings”.
3. Select and confirm menu option “Settings Lock 1”.
4. Enter and confirm Master Code (or Time Code) of lock 1.
5. If the Time Lock Delay function is disabled, select and confirm the menu option “Settings L1 Other”.
6. Select and confirm menu option “Other L1 Delay Time Lock” or “Settings L1 Delay Time Lock”.
7. Set and confirm desired Fast Locking period.
The setting is now stored. The input unit returns to the menu option “Settings L1 Delay Time Lock”. You can now configure other settings or return to the standard mode display.