The function Duress Code allows you to define whether the locking system recognizes a Duress Code (function enabled) or not (function disabled).
– The Duress Code is enabled on delivery.
– The Duress Code function can only be enabled or disabled in the settings for lock 1, and is valid for the entire locking system.
Authorization: Master Code “MA1"
Requirement: System status “Unlocked” (door locks and door bolt open)
To enable or disable the Duress Code function, proceed as follows:
1. Wake up display (if necessary) and access menu. | ||
2. Select and confirm the menu option “Settings”. | ||
3. Select and confirm menu option “Settings Lock 1”. | ||
4. Enter and confirm Master Code of lock 1. | ||
5. If the Duress Code function is disabled, select and confirm the menu option “Settings L1 Other”. | ||
6. Select and confirm menu option “Other L1 Duress Code” or “Settings L1 Duress Code”. | ||
8. Select and confi rm desired setting. – On: Enable Duress Code function | ||
| The selected setting is stored. The input unit returns to the menu option “Enable Duress Code”. | ||